V-ZUG CookTop V4000 I704, Руководство по эксплуатации

Страница: 10 / 32

3 Your appliance
3.4 Pan detection
Each cooking zone is equipped with pan detection. This detects suitable induction com-
patible cookware with a magnetic base.
▪ If cookware is placed on a cooking zone before it is turned on, illuminates in the
corresponding display.
▪ If the cookware is removed during operation or if unsuitable cookware is used,
– the power level selected flashes alternately with .
▪ If the power level is set but no cookware is detected on the cooking zone within the
next 10 minutes,
– the cooking zone switches off.
– the appliance switches off after 10 seconds if no other cooking zone is in use.
3.5 Flexible cooking
In flexible cooking, there are no marked cooking zones.
Pans with different diameters can be placed on any cooking zone. must, however, be
covered for pan detection.
For even frying, the pan must be centred on . The diameter of the base of the
pan should not be greater than the diameter of the cooking zone.
If a large pan covers both circles, both heating zones can be switched on together
with the bridging function.
3.6 Cookware
Suitable cookware
Only cookware with a magnetic base (ø12.5–22 cm) is suitable for use with the induc-
tion hob.
This can be tested in the following ways:
▪ A magnet sticks anywhere on the base of the cookware.
▪ Only the power level set illuminates on the hob.
Do not heat any unsuitable cookware using aids such as metal rings and the like.
This can damage the hob.
Sandwich base
Capsule base
Multi-layer material
Pressed base
Cast iron
Enamelled cast
iron
Enamelled steel
10