4 Operation
4.21
End of operation
When the set duration / the step duration is up or when the set target temperature is
reached.
–
The application ends automatically.
–
An acoustic signal is emitted.
–
In the display appears: «Process finished».
▸ Press «OK» to confirm the message.
–
Depending on the application, the following available options are displayed:
▪
Select one of the displayed subsequent steps to continue operation with another
application.
▪
Select the function button to access the parent application menu.
▪
Select the
function button to access the start screen (see page 16).
▪
Press and hold the function button to switch the appliance off (see page 30).
In EcoStandby as long as the temperature in the cooking space is over 80° C.
–
In the display appears: «Residual heat in the cooking space».
In EcoStandby if the food probe is plugged in.
–
The food probe temperature is displayed.
The food can be kept warm with residual heat for some time. As soon as the tem-
perature falls below 80 °C, all the displays go out. If at this point the food probe is
still plugged in, the displays only go out when the food probe is unplugged. The
cooling fan can continue to run.
After 3 minutes without interaction.
–
The display goes dark and the appliance switches off automatically (see page
30).
Removing the cooked food from the cooking space
Risk of burns!
Hot steam or hot air may escape from the cooking space when the appliance door
is opened. The accessories get hot. Use protective gloves or oven cloths.
▸ Take the food out of the cooking space when done.
▸ Any condensate or food particles in the cooking space must be completely removed
after each cooking session with steam.
▸ Wipe away traces of water or soiling with a soft cloth to prevent corrosion and un-
pleasant odours.
▸ Leave the appliance door open in the airing position until the cooking space has
cooled down and dried out.
29