V-ZUG CombiCooler V4000, Руководство по эксплуатации

Страница: 45 / 56

9 Trouble-shooting
Message Possible cause Solution
▪ «Please fill with
water – but the
water tank is
still full.» ▪ Boiler filling error ▸ Remove the water tank and then slot
straight back into position.
▸ If the error appears again, note down
the error message in full along with
the serial number (SN) of the appli-
ance (see page 47).
▸ Contact Customer Services.
9.2 Other possible problems
Problem Possible cause Solution
▪ Appliance is
not working ▪ A household fuse or
circuit breaker has
tripped. ▸ Change the fuse.
▸ Reset the circuit breaker.
▪ The fuse or circuit
breaker keeps blow-
ing. ▸ Contact Customer Services.
▪ Interruption in the
power supply. ▸ Check the power supply.
▪ Demo mode is
switched on. The demo mode can only be switched
off with the security code.
▸ Contact Customer Services.
▪ Appliance is faulty. ▸ Contact Customer Services.
▪ Cooking time
seems longer
than usual ▪ Appliance only has a
one-phase connec-
tion. ▸ Connect appliance with a two-phase
connection.
▪ Steam is not
visible during
steam cycle ▪ The temperature of
the cooking space is
over 100 °C. No solution required: Steam over
100° C is not visible.
▪ Water in door-
mounted con-
densate trough
1
2
▪ When using applica-
tions with steam,
steam condenses on
the appliance door
and the water that
results collects in the
door-mounted con-
densate trough once
the appliance door is
opened. The door-mounted condensate trough is
used to collect condensed steam; resid-
ual water collecting here is normal.
▸ Wipe away any residual water that
has collected in the door-mounted
condensate trough.
Any residual water in the door-mounted
condensate trough
1 flows into the con-
densate trough 2 when the appliance
door is closed. Wipe out the door-moun-
ted condensate trough to prevent resid-
ual water from collecting in the condens-
ate trough.
45