11 Trouble-shooting
Problem
Possible cause
Solution
The laundry is
not dry enough
and the waist-
band of jeans is
still wet.
▪
Mixed laundry load.
▸ Select a longer programme, e.g. extra
dry
.
Or:
▸ Select
timed drying.
Or:
▸ Change the level of dryness (see page
▪
Door filter and/or
door filter mat are
blocked.
▸ Clean door filter and/or door filter mat
▪
Front filter mat is
clogged.
▸ Clean the front filter mat (see page 27).
▪
Interruption in power
supply.
▸ Check the mains plug, lead and fuses.
▪
The moisture sensor
is dirty.
▸ Clean the moisture sensor (see page
▪
The demo mode is
switched on.
▸ Switch the demo mode off.
The duration re-
maining indic-
ator remains
frozen for a
longer period.
▪
Not yet reached level
of dryness required.
▸ No action is necessary. The indicator will
run automatically once the level of dry-
ness is reached.
▪
Wash load very
mixed.
▸ No action needed. The indicator will run
automatically in a while.
▪
Build-up of fluff in
door filter.
▸ Clean the door filter (see page 26).
The progress of
the programme
remains frozen
at «Final airing»
for a longer
period.
▪
The laundry is being
cooled down.
▪
A high ambient tem-
perature extends the
cooling-down phase.
▸ No action is necessary. The laundry can
be unloaded at any time as long as it is
then spread out to cool down.
▪
The temperature
sensor is dirty.
▸ Clean the temperature sensor (see page
The appliance
will not start.
▪
The appliance door is
open.
▸ Close the appliance door.
▪
Door filter or front fil-
ter mat are missing.
▸ Insert door filter or front filter mat and en-
sure it is positioned correctly.
▪
Interruption in power
supply.
▸ Insert plug into mains socket.
▸ Turn wall switch on.
▸ Check fuse or circuit breaker.
31