… Your appliance
13
Using for the first time
Before using the newly installed appliance for the first time, the following work
should be carried out.
Transport lock
Setting the language, time and date
A
Set the language, time and date in the user settings.
A
Hold the
button depressed until the
following appears in the plain text
display:
A
Press the
button repeatedly until «Language» or «Time and date»
«set?» appear in the plain text display.
A
Use the
button to make the desired settings.
Running the first wash cycle without any washing
A
Run an empty wash cycle to remove any residues from the manufacturing
process.
A
Add a little washing detergent to compartment
II
.
A
Select the main programme
.
The appliance was tested with water before being shipped. There may
therefore still be traces of water left in the appliance.
Before using the appliance for the first time, the transport lock
must be removed (3 screws with washers at the back of the
appliance).
To ensure the user settings are saved, the power supply to the appli-
ance should not be switched off for at least 30 minutes.
267 XXXXXX
FN
User s e t t i n g s
95
60