… Care and maintenance
46
Cleaning the water inlet filter
The built-in water inlet filter can become blocked by limescale deposits, rust
or foreign objects. This can trigger a corresponding fault message, which is
described in the 'What to do if ...' section.
A
Turn off the water tap.
A
Unscrew the connection
1
using water pump pliers.
A
Remove the water inlet filter
2
using pointed pliers
and then clean or change.
A
Clean the seal
3
.
A
Replace the water inlet filter
2
and seal
3
. Tighten
the connection
1
on the water tap.
A
Turn on the water tap and check for leaks.
This should only be carried out by an expert. If carried out incor-
rectly, there is a risk of flooding!
1
2
3
