Installation instructions
«Front loader» washing machine
One-family household
1064372-R03
04/02/2019
1064372-R03
6
6. Plumbing in
Local water authority regulations must be observed.
Any old water supply and drain hoses must always be replaced with new hoses.
Water inlet
Only cold water G¾” permitted, possible pressure range: 0.1–1.0 MPa (1–10 bar).
The appliance must not be connected to a mixer tap or a continuous flow boiler!
1
A
Preferred alignment for Aquastop valve
block
A
(sound-optimized installation):
▸
The tap seal seat must be clean and flat.
▸
Install hose without kinking or twisting it.
▸
Check for leaks.
Water outlet
When installing the drain hose, protect it against damage and kinks!
Installing the drain hose
Work steps
Hose clamp
Drain hose
A
Rubber connection
1.5 m
ø internal 21.5 mm
ø external 28 mm
▸
For drainage into fixed upright outflow
pipe, shorten drain hose
A
to necessary
length.
▸
For drainage into a bath tub or sink, etc.,
drain hose
A
cannot be shortened!
Drainage into an open-top fixed upright
outflow pipe
Drainage into a bath tub or sink, etc.
Work steps
≤1200
≥350
B
A
≤700
A
B
▸
For all connection types, mount the hose
support
B
.
▸
For drainage into a bath tub or sink, etc.,
secure the hose end with hose support
B
.
Max. pumping height: 1200 mm
Max. pumping height: 700 mm
