V-TUF VSC240V, Руководство оператора

Страница: 13 / 40

13
Picture 2
Important points:
1. Run machine on this setting and you will notice the hot water will start steaming.
2. Proceed with cleaning.
3. Please note when the unit is very hot, the trigger can only be closed off for very short periods.
4. If you wish to take a break – you must turn the thermostat knob (picture 2) anti-clockwise to 0 degC and
run the water cool. Do this every time!
5.The coupling protection
Steam calibration guide:
Please note: For specialist steam application operator induction with the above process MUST be
done!
With the aid of the V-TUF Super-heated steam performance kit. You can customise your “VSC” for many
demanding & specialised cleaning processes, including historical restoration & renovation projects.
To select the ultimate pressure suited to the surface you are cleaning, and make sure that you have the
correct nozzle size (see below) to suit that pressure.
With standard lance:
Nozzle size: 045 (or 2x size 025 in surface cleaners) – Pressure: 40 BAR (approx. temperature 100 deg C)
With specialised steam lance:
Nozzle size: 03 (or 2x size 02 in surface cleaners) – Pressure: 50 BAR (approx. temperature 110 deg C)
Nozzle size: 025 - Pressure: 60 BAR (approx. temperature 130 deg C)
Recommended accessories for specialized steam cleaning:
SUPER HEAT INSULATED OPTIGUN TAIL HOSE & LANCE & SSQF QR JET HOLDER (0.6m) - GLKIT8SSQF06
SUPER HEAT INSULATED OPTIGUN TAIL HOSE & LANCE & SSQF QR JET HOLDER (1m) - GLKIT8SSQF1
V-TUF HOSE JOINT SHIELD - VTFB00150KITC
Spare coupling seals:
MSQ & KWS DURAKLIX SPARE OPTISEALS (x10) - B14.80PT10
SSQ DURAKLIX SPARE OPTISEAL (x10) - B14.50T10