2 EASY
4. Select 4 to enter
Namelist update
,the information of “update
ready” will be showed.
3. Copy the Namelist file to SD card by computer.
CONFIGURATION
System Update
5. Insert the SD card to slot, the information of “Download...” will be
showed when the updated is in progress. After 3 seconds, a long
sound “BP+” will be heard to start the updated.
6. When update is finished, it will return to
Standby Mode
interface.
7. Press
touch button to show the Name list
2) Namelist update by DT-Config
DMR18S-Config software is for parameters setting, namelist setting
etc. It is great convenience to installation.
The DMR18S-Config software operation is as follows:
1. Open “DMR18S-Config” software,connnect DMR18S to PC via
USB-RS-485;Click “Setting” on the menu bar then click Com to select
right Com.(Com information can be found in “ My Computer ->
Properties ->Device Manage->Ports”)
2. Then if DMR18s is connected to PC successfully, one tips of “Device
connected” will be showed. Click “Room Table” tab to edit Name list.)
3. Then click “Insert” to create the first item.
Each item have 5 different properties:
Address:
Monitor’s address (can be find in “about”);
User Code:
The number you can dial to the monitor;
Name:
The name of resident;
Router:
Set the BDU address when it is in Router mode;
Gateway:
Set the BDU address when it is in Gateway Mode.
DMR18S Technical M
a
nu
al
-13-