2 EASY
Input the master code.
(Default: [ ] +[#])
Beep+, Beep
Beep+, Beep
Beep+, Beep
Beep+, Beep
Beep+
Beep+
Beep+
Beep+
7.Reset code setting
8. &# function setting
6.Setting operation tone
(Default
ON)
(Default
Normal)
(Default
0(opened))
Input the setting code.
Inputting of code
Input the setting code.
5.Setting the unlock mode
04+#
05+#
range:0:(open)/1:(close)
1+#
0/1
0/1
0/1
1+#
1+#
1234+#
Input the setting code.
06+#
Input the setting code.
07+#
(ex.: 1)
Inputting of code
Inputting of code
Inputting of code
range:0:(on)/1:(off)
(ex.: 1)
range:0:(normal)/1:(reverse)
(ex.: 1)
*
*
*
- The unlock mode can be set on
both monitor and door station,
and the valid value is the number
you set last time.
- When the operation tone is
set to 0,pressing the digital
keypad will sent out a sound
of beep.
- When the operation tone is
set to 1,pressing the digital
keypad will blink one time.
- Cancel all the passwords except
the master code.
- Restore the master code to
default value(1,2,3,4)
- When the item is set to 0,press
the button to cancel the input,
and press the # button to confirm
the input.
- When the item is set to 1,press
the # button to cancel the input,
and press the button to confirm
the input .
Beep+, Beep
-
When the “ cancel” key is pressed, the indicator will show its standby color, the buzzer beeps, and the system
exits the setting mode.
-
When there isn’t any operation in 10s, the buzzer beeps, and the system exits the setting mode.
Beep, Beep+
*
-
When setting failure, the buzzer beeps.
DT System Test Manual
-8-
