V-TAC VT-204100, Инструкция по эксплуатации

Страница: 23 / 33

25
Figure 20. Installing expansion bolts (unit: mm)
A Drill holes in the ground by using a hammer drill.
B Partially tighten the expansion bolt and vertically insert it into the hole. Hit the expansion bolt
using a hammer until the expansion sleeve is fully inserted into the hole.
C Partially tighten the expansion bolt.
D Remove the bolt, spring washer, and flat washer.
8 Place the cabinet in the installation location. Use M10×90 expansion bolts to fix the expansion
holes of the master cabinet and slave cabinets to the ground.
Figure 21. Location of the mounting holes (unit: mm)