V-TAC VT-204100, Инструкция по эксплуатации

Страница: 22 / 33

24
Figure 18. Fixing the high-voltage box
6 Whole machine fi xing, drill holes according to the position of the battery cabinet installation holes.
The top is fi xed to the wall, and the bottom is fi xed to the ground, using M6 Expansion screws.
If the battery cabinet is installed against the wall, it can be fixed on the wall.
7 Use a hammer drill to drill holes for installing the expansion bolts and then install the expansion
sleeves in the holes.
Figure 19. Expansion bolt composition
(2) M10 bolt (2) Spring washer (3) Flat washer (4) Expansion sleeve
Ensure the expansion tube of the expansion bolts fits completely into the hole. The expansion sleeves must be
completely buried under the ground to properly facilitate subsequent installation.