V-fit PT141, Сборка и руководство пользователя

Страница: 16 / 24

User Instructions
Page 16
Calorie: 0-999 kcal
Distance: 0-99.99 km
Time: 0-99 minutes: 59 seconds
Pulse:
Computer operation:
60-200/minute
Manual setting mode:
Manual setting mode is for user to set time, distance and calorie.
A. Time setting (scale: 1-60 min)
Under ready status, press MODE, Time window will twinkle, press “+/-“ to set time. Press ENTER to enter distance setting.
B. Distance setting (scale: 0.1-99KM)
DISTANCE window will twinkle, press “+/-“ to set distance. Press ENTER to enter calorie setting.
C. Calorie setting: Calorie window will be flickering, press “+/-“ to set calorie, press Enter to confirm setting.
D. TIME, DISTANCE, CALORIE window twinkles, press “start/stop” to operate.
If there is no setting of time, distance, calorie, these window will add up. Otherwise, they will count down. When finishing
count down, the treadmill will stop and back to ready status.
A. Start the computer: connect the power, press the switch on machine, put the safety key in the groove on computer,
the computer is ready.
B. Manual operation: when computer is ready, press the “START/STOP” button, the time will count down 3 seconds,
then the treadmill starts, the initial speed is 1 km / h. The LCD will show the speed accordingly.
Adjust the speed by pressing speed button on computer. The speed will increase
by 0.2 km / h each time.
Preset program operation
This treadmill has 18 preset programs.
P1-P5 is weight losing program.
P6-P10 is Physical compliance training program.
P11-P12 is Physical training program.
P13-P15 is Physical fitness maintaining program.
P16-P18 is Physical recovery program.
a.
Press “PROGRAM” to enter automatic program status, the LCD will show program 1, and the speed diagram.
It shows total time.
b.
Press / button to change programs or press program quick key 3,5,7,9 press ENTER to enter the program you want.
c.
The time window shows program preset total time. Press / button to change program running time
(The scale is 10-59 minutes.), press ENTER after setting.
d.
Press “START/STOP” to enter program status. The time starts to count down. When changing different programs,
it will produce beep sound. When the time descends to zero, the speed slows down and the treadmill stop.
e.
During program running, you can press “Speed –“or “Speed +“to change speed, and press “Incline –“or
“I“to change incline. When it comes to the next section, it will show the initial data of this section.