V-fit FC2790-UK, Сборка и руководство пользователя

Страница: 21 / 24

Assembly
Assemble the Pedals (Left and Right) (37L & 37R) to the Pedal Crank
(41) (See NOTE). Both Pedals MUST be tightened securely otherwise
damage may occur to the Crank. Fit the Pedal Straps (Marked L and R)
ensuring a snug, but not tight fit with your normal footwear.
5
Note
6
FULLY TIGHTEN all Bolts, Nuts and
Fittings now, ensuring that your
product in located on a clear flat
surface before doing so.
Your product will now be ready to use.
Page 21
Connect the Exercise Monitor Link Wire (14) to the“Sensor”
socket on the back of the Exercise Monitor (52).
Connect the Pulse Sensor Wire (9) to the“Pulse” socket on
the back of the Exercise Monitor (52). Feed any excess
wires back into the Handlebar Upright (2) and securely fit
the Exercise Monitor (52) onto the top plate of Handlebar
Upright (2) using 2 x M5 x 10mm Self-tapping Screws (51)
pre-fitted to the back of the Exercise Monitor (52).
Warning!
Heart rate monitoring system may be inaccurate.
Over exercise may result in serious injury or death.
If you feel faint, stop exercising immediately.
PULSE SENSOR
14
9
One Pedal is supplied with a
RIGHT HAND THREAD for the
RIGHT HAND SIDE of the cycle
and must be fitted by turning
CLOCKWISE. The other Pedal is
supplied with a LEFT HAND
THREAD for the LEFT HAND SIDE
and must be fitted by turning
ANTI-CLOCKWISE.
Note
CW
ACW
14
9
37L
37R
41
51