V-fit Air Elliptical Trainer, Сборка и руководство пользователя

Страница: 18 / 24

Assembly
Remove 1 x M8 x 20mm Allen Bolt (58), 1 x M8 Spring Washer (52) and
1 x D-Shape Washer (49) from one end of the rotation rod (12) and slide
it through the Right Hand Coupler Bar (4). Ensuring the Pivot Tube is facing
the rear of the Cross Trainer, slide on a Wave Washer (59) and insert into
the Main Frame (1)
Slide another Wave Washer (59) onto the Rotation Rod (12) followed by
the Left Hand Coupler Bar (5), again making sure the Pivot Tube faces the
rear of the Cross Trainer. Refit the D-Shape Washer (49), M8 Spring
Washer (52) and M8 x 20mm Allen Bolt (58).
2
Fully tighten both Allen Bolts.
Note
FIG 2
59
12
49
52
58
4
1
FRONT
REAR
Pivot tube
faces rear
Page 18
Air Elliptical Trainer