Recharge the unit.
Send the unit to the
factory for repair.
Please open up the
wheel cover and connect
the wires of wheel or
send the unit to the
factory for repair.
Battery Low.
1.check if the battery is
installed or not.
2.power is too low.
The adaptor is broken-down.
The wire of wheel inside the
unit loosens.
The unit cannot go straight,
just circles around.
The unit cannot be
recharged, and the LED
indicator is not lighted.
Cannot start up the unit.
Red LED flashes after the
unit being started up.
1.to install the battery
correctly.
2.to have the battery
full-charged.
Trouble
Possible Reason
Resolution
4
3
2
1
TROUBLESHOOTING
Please poke the button
and it will work.
The selection button gets
stuck.
Turn on the unit and press
the selection button but the
unit still doesn't start up.
5
10
9
8
7
6
11
Please replace with new
batteries. / Install the
batteries again in correct
direction.
The power of remote control
is exhausted. / The batteries
are not installed in it. / The
batteries aren't installed in
correct direction.
The remote control doesn't
work.
Relocate the station to
proper position and
adjust the height to
ensure the contacting
points of unit can touch
the contacting plates of
the station for recharge.
Check if the station is located
properly according to the
operation manual.
The unit cannot go back to
the docking station for
recharge.
Please turn on the
cleaner.
The unit is not turned on.
The unit cannot be started
up after fully charged at
the station.
The unit cannot recharged
through the docking station
.
The battery is totally flat and
cannot be charged by docking
station.
Charge the machine using
the adaptor
Set on the "FULL GO"
function on the docking
station.
The "FULL GO" function has
not been set already.
The unit cannot start up
automatically after fully
charged at the station.
If they become crooked,
you can scald them in
hot water to return them
to their original shape.
Being used for a long time
The side brushes had
become crooked, not good
to sweep.
12
Put the cleaner back to
the station.
The unit is not at the station.
Cannot set "FULL GO"
on the docking station.
13
Please remove the
obstacles.
The obstacles stuck the unit
from going back for recharge.
The unit cannot go back to
station for recharge.
23
