19
Operating instructions VisionLine
19
3�2�5 Hose mounting
If you are using an optional wall bushing „double socket“ ,you must cut the hose at the suitable positi-
on. For this purpose, temporarily lay the hose between the camera and the wall bushing and mark the
separation point. Now carefully cut around the hose with a sharp cutter knife. With the black corrugated
hose, it is important to cut as centrally as possible on the „mountain“ of the corrugated profile.
NOTICE
Do not use scissors for this, as the cable package is guided inside the hose. This must not
be cut under any circumstances.
seaparating line
Disconnect the remaining hose from the cable package and lead it through the wall bushing „double
socket“ and install the hose. This must either be snapped into the hose connector (black corrugated
hose) or fixed with a union nut (black/brown plastic hose).
On the outside of the machine, you must first lead the cable package through the remaining hose again
and into the control box. Then the hose can be mounted on the double socket and the control box as
described above.
