10
NivoGuide® 8100 • Two-wire 4 … 20 mA/HART
4 Connecting to power supply
61266-EN-190215
8. Connect the screen to the internal ground terminal, connect the
½Ð̽ÊƹĿÊÇÍƼ̽ÊÅÁƹÄÌÇÈÇ̽ÆÌÁ¹Ä½É͹ÄÁ˹ÌÁÇÆ
9. Tighten the compression nut of the cable entry gland. The seal
ring must completely encircle the cable
10. Reinsert the display and adjustment module, if one was installed
11. Screw the housing lid back on
À½½Ä½»ÌÊÁ»¹Ä»ÇÆƽ»ÌÁÇÆÁËŲÆÁËÀ½¼Ɩ
4.2 Wiring plan, single chamber housing
À½¾ÇÄÄÇÏÁÆ¿ÁÄÄÍËÌʹÌÁÇƹÈÈÄÁ½ËÌÇÌÀ½ÆÇÆƘÐƓÐƘÁ¹¹Æ¼ÐƘ¼ƘÁ¹
version.
5
1
2
+
( )
(-)
6 7 8
4...20mA
2
3
4
1
Fig. 7: Electronics and connection compartment - single chamber housing
1 Voltage supply, signal output
2 For display and adjustment module or interface adapter
3 For external display and adjustment unit
4 Ground terminal for connection of the cable screening
4.3 Wiring plan, double chamber housing
À½¾ÇÄÄÇÏÁÆ¿ÁÄÄÍËÌʹÌÁÇÆ˹ÈÈÄÑÌÇÌÀ½ÆÇÆƘйËϽÄĹËÌÇÌÀ½ÐƘÁ¹
version.
Electronics and connec-
tion compartment
