UWAY Vigilant Hunter U150, Инструкция по эксплуатации

Страница: 7 / 65

ENGLISH
Page | 4
box (with or without bracket). Camera can be mounted with nylon
strap (included) or security box (sold separately). It is recommended
to mount the camera 3-4 feet high overlooking desired area and 20-30
feet away from target area for maximum sensitivity in most situations.
Adjustments may be required depending on animal size and
environment. PIR motion detection distance changes based on
ambient temperature and setup. Higher ambient temperatures will
reduce PIR motion detection range thereby requiring camera to be
closer to desired location. Mounting camera too high or angling
camera may result in animals or humans going under or above the PIR
motion detection range. Angle the camera perpendicular to the ground
to maximize the IR lighting potential. Using UWAY Bracket provides
optimal versatility when mounting the camera. UWAY XtendIR will
significantly increase night IR lighting distances out to 60-100 feet.
GETTING STARTED
SD MEMORY CARD
The camera supports both SD and SDHC memory cards up to 32GB.
The camera does not have any internal memory and will not turn
ON without SD card inserted.
1. Open camera
2. Insert SD card with marked side facing front of camera
3. Push gently until card clicks into place
4. Push card again to remove
Note 1: Ensure SD card is NOT in locked position.
Note 2: Format SD card in camera before using each time. This will
create a file on the SD card where the camera will save images to.
Note 3: It is always recommended to test the SD card by taking some
pictures to ensure SD card works properly before leaving camera for
extended periods of time.
WARNING: Make sure camera is OFF when inserting or removing
SD memory card