5. Meridian PC interface
51
English
SCUBAPRO MERIDIAN
5.
MERIDIAN PC
INTERFACE
5.1 Cradle
The communication between Meridian and
PC/MAC is possible only with a cradle.
The communication between the Meridian
and the cradle is established via the contact
on the case. Therefore if the water contact
or the spring contact of the cradle has dirt
on the surface, this should be cleaned with
a piece of clothing before use.
To avoid scratching your Meridian, first
place contacts together and then click the
Meridian to the cradle.
5.2 Introduction to
SCUBAPRO LogTRAK
LogTRAK is the software that allows
Meridian to communicate with a Windows-
based PC or Mac OS.
In order to take advantage of any of
these features, you need to establish a
communication between your PC and
Meridian with a cradle.
To start the communication
1. Connect the cradle to your PC:
2. Launch SCUBAPRO LogTRAK on your
PC
3. Select the serial port where the cradle is
connected
Extras -> Options -> download
Select the COM port that is used for
Meridian cradle.
4. Place the Meridian on the cradle
5.2.1
Download dive
From LogTrak, by selecting Dive -> Cradle:
Download Dives you can transfer the
Meridian Logbook to your PC or MAC.
There are three main views each showing a
specific part of your dive logs:
•
Profile showing the graphical data of
the dive.
•
Details about the dive, where you can
edit for example the equipment and
tank information.
•
Location, which shows your dive site at
the world map.
The selection tabs for views are on the top
of the main window.
Содержание Meridian
Страница 1: ... Meridian ...
