Uwatec Meridian, Руководство пользователя

Страница: 50 / 58

50
4. Meridian accessories
SCUBAPRO MERIDIAN
5. Meridian pC interface
4. Meridian
aCCessories
4.1 HR belt
Meridian receives fthe signal of the
SCUBAPRO heart rate belt. The position to
wear a HR belt is shown below.
Adjust the strap so that it is comfortable to
wear but so that it holds on the place.
When using a diving suit the HR belt must
be directly against the skin.
Moisten the electrode areas if your skin is
dry or when using a dry suit.
You must enable the heart rate setting
at your Meridian, refer to chapter
3.2.4
Workload settings (pulse limits)
of how
to do this.
After a dive rinse the heart rate belt in fresh
water, dry it and store on a dry place.
With completely sealed HR belts the battery
cannot be changed.
We recommend having the battery change
by authorized SCUBAPRO dealer for the
HR belts with a battery cap.
Check the operation conditions and depth
rating of the HR belt from the unit or its
package.
4.2 Nylon arm strap
Divers using thick neoprene wetsuit or
drysuit may prefer longer arm strap.
Meridian can be equipped with one piece
31cm/12inch Scubapro nylon arm strap.
F
NOTE: The Meridian arm strap is
attached with Solid Stainless Steel pins
that are splintered on one end. Always
push the pins out with the splintered
end first. In the housing the splintered
side can be recognized from slightly
larger diameter guiding at the hole.
The disassembly and assembly of the
arm strap requires a special tool. We
recommended the arm strap change
to be done by authorized SCUBAPRO
dealer.