32
3. Meridian as a dive computer
SCUBAPRO MERIDIAN
3. Meridian as a dive computer
3.6 Diving with Meridian
The functions of the buttons during diving
are summarized in the table below.
Note that Meridian can be set to three dive
modes: SCUBA, APNEA and GAUGE. Due
to the operation differences also buttons
have different functions in each mode.
LIGHT
(Left upper
button)
• Short press = backlight,
• Long press = bookmark
+/UP
(Right upper
button)
• Short press = alternative display data
• Short press in APNEA mode = switch between HR and ASC speed
on display
• Short press in GAUGE mode = alternative display data
• Long press in GAUGE mode = reset average depth counter
-/DOWN
(Right lower
button)
• Short press = reset safety stop timer
• Long press in APNEA mode = manual start and end the dive
• Short press in GAUGE mode = start/stop timer
SEL/ESC
(Left lower
button)
• Long press = select manual gas switch
• Short press (after long) = enter manual gas switch
3.6.1
Display information
Upon immersion, Meridian will automatically
start to monitor the dive regardless of what
state it was in prior to the immersion.
Details on the information displayed can be
found in the next sections.
The dive time is displayed in minutes. If during
the dive you ascend to the surface, the time
spent on the surface will only be counted if
you descend again below 0.8m/3ft within
5 minutes. This allows for brief periods
of orientation. While on the surface, the
time will not show as progressing but it
is running in the background. As soon
as you submerge, the time will resume,
including the time spent on the surface. If
you spend more than 5 minutes at depth
shallower than 0.8m/3ft, the dive will be
considered ended, the logbook closed and
a subsequent immersion would cause the
dive time to start again from zero.
Maximum displayed time is 999 minutes.
For dives longer than that, the dive time
starts again from 0 minutes.
Current depth
Dive time
Max depth
No-stop time
Dive display limits (mertic)
Содержание Meridian
Страница 1: ... Meridian ...
