Uwatec Galileo 2, Руководство пользователя

Страница: 22 / 96

22
GALILEO 2 (G2) USER MANUAL
2 .2 .2 Dive mode (Algorithm
selection)
Your G2 allows you to choose between
Scuba, Gauge and Apnea modes.
When the G2 has not been submerged
for a while the display appears as shown
below:
F
NOTE: Since Gauge and Apnea
modes do not track tissue saturation,
a 48-hour locking interval occurs
between the time the last dive is
made in Gauge or Apnea mode and
a change to Scuba mode is possible.
Conversely, the G2 shown below
has been dived in Scuba mode and
cannot be changed to Gauge or
Apnea mode until the desaturation
time has elapsed.
If you decide to change modes before
the 48-hour interval ends, or before full
desaturation occurs, you will have to go to
the desaturation reset menu and make a
manual desaturation reset.
2 .2 .3 Safety stop timer
Safety stop timer duration and start mode
can be edited in this menu.
See chapter: Safety stop timer to learn
how this feature is used while diving.
2 .2 .4 ppO
2
max
The ppO
2
max setting defines the maximum
limit for oxygen partial pressure. Gas O
2
settings higher than this limit cannot be
selected for any tank.
2 .2 .5 Water type
The G2 measures pressure and converts it
to a depth value by using water density as a
constant. A depth of 10m/33ft in salt water
corresponds approximately to 10.3m/34ft
of depth in fresh water.