Uwatec Galileo 2, Руководство пользователя

Страница: 11 / 96

11
English
GALILEO 2 (G2) USER MANUAL
Select each unit with the left or middle
button, and confirm it with the right button.
Set the time zone with the left or middle
button and confirm it with the right button.
After this initial setup, your G2 will boot to
a display that we call the main
time-of-
day display. This is the display in which the
current time is shown in the main field.
You G2’s button functions can be found
on-screen. To illustrate, the screen above
shows that pressing the left button will
take you to the main menu, pressing the
middle button will take you to the logbook
and pressing the right button will dim the
display light.
However, be aware that these function
labels may change depending on the
operational mode you’re currently in.
F
NOTE: There are two methods for
pressing the G2’s buttons:
1. “Short” press. This is the normal
method used in most cases with the
labelled functions.
2. “Press-and-hold.” This method is
used only in special cases. They are
described in this manual but are not
labelled on the screen.
Button functions at the surface are
summarized in the following table.
LEFT BUTTON MIDDLE BUTTON RIGHT BUTTON
Press Press and hold Press
Press and
hold
Press
Press and
hold
SCUBA,
GAUGE
Main menu Oxygen setting Logbook
Gas summary
table
Backlight Compass
Pictures
APNEA
Main menu
Manual start of
a dive
Logbook Pictures Backlight Compass