Uwatec Aladin ONE, Руководство пользователя

Страница: 9 / 38

9
English
ALADIN ONE USER MANUAL
2.2.7 Checking the battery
condition
From the time of day display you can check
the battery condition by pressing the left or
right button to scroll to the watch menu.
With a press-and-hold of the right button
you enter watch settings, then press the
right button 6x to scroll to the battery status
screen.
The battery status screen shows how much
energy is left in the CR2450 battery. A fresh
battery is indicated by 6 zeros.
While the Aladin One periodically monitors
battery status, you can manually trigger a
status check with a press-and-hold of the
right button while in this screen.
The Aladin One’s intelligent battery
algorithm will limit some functions as you
near the end of the battery’s life. See
the table below for battery status and
corresponding function limitations.
Indicator in battery
status display
At other displays Battery status Function limitations
000000 Fresh battery none
_00000 Battery ok for diving none
__0000 Battery ok for diving none
___000 Battery symbol Weak battery, change
to fresh
Backlight not
operating
____00 Blinking battery symbol,
no dive symbol
Completely used battery,
change to fresh
Buzzer and backlight
not operating, diving
not recommended
_____0 Blinking battery symbol,
no dive symbol
Completely used battery,
change to fresh, Aladin
One may make a reset
any time and remain off
Diving mode not
allowed, only watch is
active. Settings cannot
be changed (OFF)
F
NOTE: Battery capacity and
voltage at the end of a battery’s
lifetime may vary between battery
manufacturers. Generally, operation at
low temperatures decreases battery
capacity. Therefore, when the battery
indicator drops below 4 zeros, change
the battery to a fresh one before
making any new dives
.
WARNING
When the battery is critically low, the watch
settings are disabled (the watch set menu is
“OFF”).