Uwatec Aladin ONE, Руководство пользователя

Страница: 10 / 38

10
ALADIN ONE USER MANUAL
WARNING
• If the battery status graph shows only 2
zeros, the battery symbol will blink, both
on the surface and in dive mode, to alert
you of a dangerous situation. At this point
the battery may not have enough energy to
finish a dive. In such a case, audible alarms
and attention messages are disabled, the
backlight is deactivated, and you run the
risk of a computer malfunction.
Do not let
the battery reach this condition !
• Always replace the battery when the steady
battery symbol appears (3 zeros).
F
NOTE: Logbook information is not lost
even when the battery is removed for
an extended period of time
.
2.2.8 Active backlight
The display of the Aladin One can be
illuminated both on the surface and under
water. The backlight can be activated with
a press-and-hold of the left button.
The light will turn off automatically after 6
seconds.
F
NOTE: Repeated activation of the
backlight will reduce battery life .
The Aladin One monitors the battery
level throughout every dive, and if
the available energy drops below the
warning threshold, the Aladin One will
automatically disable the backlight to
prevent a computer shut-down
.
2.2.9 Switching off the display
From the time of day display you can
switch off the Aladin One by pressing and
holding both buttons simultaneously. On
the surface the Aladin One switches off
automatically after 3 minutes of non-use.
2.2.10 Alarm clock
The alarm clock tone works only at the
surface.
If the alarm clock is “on” the time of day
display shows the alarm clock/transmit
symbol.
When the alarm is triggered, the alarm
clock/transmit symbol flashes and special
attention beeps sound for 30 seconds or
until you press a button.
2.3 SOS mode
SOS mode (lock duration 24 hours) and surface
interval from the dive