BioDoc-It and VisiDoc-It Imaging Systems
14
Adjusting the Screen Angle
To adjust the angle of the screen, loosen
the knobs on each side of the monitor.
Twist each knob counter-clockwise (note
that you will actually be turning each knob
in the opposite direction from each other).
Tilt the screen to the desired angle.
Turn each knob clockwise to tighten
.
Operating the TS Software
The system will go through the boot-up process. When ready, the LCD will display the TS software screen
similar to the one below:
To shut down the TS software, touch the X on the bottom left corner of the screen.
To turn the system off, press the MAIN POWER button or power down from the Windows icon on the bottom
right corner of the screen.
Refer to the TS Software User Manual for further instructions on using the software.
