Manufacturer: UVI Group Corporation GSM Car Alarm System with GPS Car Tracking (GPS-118V)
-15/18-
Engine is running.—— Car is running or ignition is turned on.
Immobilizer is activated.—— Car is immobilized.
Immobilizer is de-activated. —— Car is allowed running.
No phone number.—— There is no alarm phone number and emergency number in the system.
This system needs at least 1 alarm phone number for working normally.
5.3.2 Listen In
Dial the number of mainframe and choose 2 in the main menu to listen the voice inside the car.
When the owner gets through the line, and then listens the voice, thieves inside the car will not be
aware of it.
In the mode of listen in, the owner can press * to shift from talking to non-talking. Press # to
delay, and press 0 to exit.
5.3.3 Car Connected
Dial the number of mainframe and choose 3 in the main menu to broadcast to thieves inside
the cars.
In connected mode, press # to delay, and press 0 to exit.
5.3.4 Car Control
Dial the number of mainframe and choose 4 in the main menu to control the car. Submenu is
as follows.
Press 1 to arm the car by phone and lock doors. The system enters into light and sound armed
mode in 3 seconds. There will be voice notice at the same time, “Armed by phone”.
Press 2 to disarm by phone and unlock doors. There will be voice notice at the same time,
“Disarmed
by phone”. (Notice: When the car is armed by phone or dialer, it is can only be disarmed by phone
or dialer.)
Press 3 to disable shock sensor. If there is a shock trigger, there will be no alarm.
Press 4 to enable shock sensor. Shock sensor works.
Press 5 to activate immobilizer. The car will be stopped after 10 seconds. After immobilizer is
activated, only an order of Deactivate Immobilizer can make the car start normally.
Press 6 to deactivate immobilizer.
(Note: Activate Immobilizer and Deactivate Immobilizer are absolute orders, which only control the
pneumatic circuit/electric circuit, no change of arm/disarm mode.
Press 7 to remote start the engine.
Press 8 to cancel remote engine start. The ignition will be off and the engine will be stopped.
5.3.5 Change Password
Dial the number of mainframe and choose 5 in the main menu to change password.
There is no factory password in this system. Before setting a password, the user must set a
phone number at least. Otherwise this system will give voice notice, “No phone number”.
If the owner forgets the password, he can trigger alarm purposively; for example, open the door
by key in armed mode. The system will dial the alarm phone number. At this time, no password is
required before he enter into the control menu. Following the voice instruction, the owner can
change the password by pressing 5.
It is suggested to set a password before using this system. Otherwise, somebody who knows
the alarm phone number can also operate the car.
5.3.6 Set up Phone Number
Dial the number of mainframe and choose 6 in the main menu to set up alarm phone number. 2
or 3 alarm phone numbers and 1 emergency number can be set into this system.
