User Manual for UVD Robots
6.2 UVD Robot automatic workflow (Step by Step)
1.
Charging:
-
Ensure the robot has been charging. Now take out the charging plug, turn the robot
on and turn on the tablet too.
-
After approx 20 secs, push the ‘start’ button next to the red E-stop button on the
robot.
-
Make sure tablet the is connected to the robots wifi and open the UVD Robots app
2.
Assign job:
-
Now press the plus sign ( + ) in the app. And you will see a list of rooms you can
disinfect
-
Choose a room, press and step aside as the robot will drive to the entrance of it
3.
Robot arrives at room:
-
Take the tablet out of the robot and open the door.
-
Point 1 on tablet: Press the ‘Done’ Button. The robot will now drive inside the room
12
