UTS UTS 700 ONEMAN, Инструкция по эксплуатации, Страница: 14 / 20

UTS 700 ONEMAN INSTRUCTION MANUAL
Page 14
2.2/4.2m Configuration Assembly Instructions.
Fit OMT Brace to 2nd and 4th rung of tower, ensure bottom clamps are locked (refer to page 7)
Connect two of the 4 rung frames together using the clips, then climb the tower on the inside
using the rungs of the end frames. Insert these onto each end of the tower, ensure they clip in
(refer to page 6)
Fit a OMT Brace to the 5th and 7th rungs of the tower, the hang an assembly bracket from it to
all the easy moving of components to higher levels.
Fit a trap door platform to 8th rung of the tower, engage the wind locks.
4.
Start with steps 1 — 3 on page 9
1 - 3.