During the reset time the "ON" and "Reset" buttons is replaced by two buttons that can cancel the reset,
"Turn ON" and "Turn OFF".
During the rest time the browser contacts the IP-Switchbox800 with some seconds interval and updates
the buttons. So after the reset time the web page is updated and the "ON" and "Reset" buttons are
restored.
4. The configuration page, (config.htm).
Here you do the configuration.
The IP-address, http port, basic/digest authorization, titel over the button, delay at power-on, reset
time, user name, password and rights for not logged in user. The MAC address is also showed.
IP address and port number.
The IP address is written in common way with dots between.
You can also change port number if you want other port number than 80 for http.
After changing IP address/port you have of course to contact the box at the new IP address/port.
Switch name
I the box ”Switch name” you can write a name to be placed above the button.
Turn on delay
"Turn on delay" is used to delay switch on of the outlet for up to 10 minutes after power failure. This may be
used for two purposes.
First to start up equipment in sequence. For example first the printer and then the computer.
Secondly it may be used with delays of just a few tenth of a second delay to reduce the load on the mains
fuse.
