2. The main page, (index.htm).
The main page (index.htm) is used to switch
the outlet ON/OFF..
When you click at the ON or OFF button a
request for this is sent to the box. Then the button
turns gray until the box has confirmed the
change. When the confirmation arrives the button
indicates current setting again. In this way you
can be sure that the change request actually has
reached the box and been serviced.
The text “IP-SwitchPlug” above the
ON/OFF button may be replace by your
own text. This is done at the configuration
page switches.htm
3. The reset page.
The reset page (reset.htm) has in addition to the ON/OFF button also a reset button for the outlet in
position ON.
When the output is in position “ON” there are a
button for reset present. When you click it the
output is switched off for the preconfigured time.
Here the reset is active.
It can be interrupted by clicking "Turn ON"
or "Turn OFF".
By clicking a reset button the outlet is switched OFF during a configured time (up to 600s). After that
time it is automatically switched ON again.
The switch off time is controlled by IP-SwitchBox800 and is hence not dependent of any delays on the
internet. The time is configured at the configuration page config.htm.
These changes can only be done after you have logged in as admin, as described in the configuration
part below.
