3. The reset page.
The reset page (reset.htm) has in addition to the ON/OFF buttons also reset buttons for the outputs in
position ON.
On output 5 a reset is started. The Reset can be cancelled by clicking "Turn ON" or "Turn OFF".
By clicking a reset button the output is switched
OFF during a configured time (up to 600s). After
that time it is automatically switched ON again.
The switch off time is controlled by IP-SwitchBox
902 and is hence not dependent of any delays on the
internet.
The time is configured at the configuration page
switches.htm.
These changes can only be done after you have
logged in as admin, as described in the
configuration part below.
During the reset time the "ON" and "Reset"
buttons is replaced by two buttons that can
cancel the reset, "Turn ON" and "Turn OFF".
During the rest time the browser contacts the
IP-Switchbox902 with some seconds interval
and updates the buttons. So after the reset
time the web page is updated and the "ON"
and "Reset" buttons are restored.
