Installation Guide
Roseberry Cloakroom Washbasin Unit
Important Information
•
Ensure product contents are complete.
•
Check the product for any signs of damage and remove any protective film.
•
It is recommended that a technically competent installer undertakes installation.
•
It is the
installer’s responsibility to carry out a thorough assessment of the installation
environment (i.e. wall type/structure and the combined weight of the cabinet and basin) and
use appropriate fixings.
•
Care should be taken when drilling to avoid any hidden wires or pipes.
•
To prevent the cabinet falling from the wall this product must be fixed using the wall
attachment device and brackets provided.
Installation
Mark a horizontal line on the wall at the required height
X---X
. Ensure
that the wall brackets will fit inside the width of the cabinet and are equally
spaced to ensure even distribution of weight. Secure the wall brackets to
the wall using suitable fixings.
Hook the unit onto the wall brackets so that the spring locks the arm
into place.
To alter the position of the cabinet on the wall, adjust the two screws in
each hanging bracket. Adjusting screws A will move the cabinet up and
down. When the cabinet is level on the wall, screws B will tighten the cabinet
to the wall.
Door hinge adjustment
•
To square the door against the cabinet, adjust screws A.
•
To adjust the door closer to or further away from the cabinet,
adjust screws B.
•
To adjust the door vertically, slacken screws C. Re-tighten once
the door is adjusted as required.
•
To remove the door hinges from the cabinet, press button D.
•
To remove the door hinges from the door, remove screws E.
Care & Maintenance
Furniture should be regularly dusted with a soft cotton or micro-fibre cloth. For more thorough
cleaning, occasionally wipe your furniture with a soft cloth dampened with a mild detergent
solution. Surfaces should be thoroughly dried with a lint free cloth to prevent watermarks. Under
no circumstances should solvent cleaning agents, bleach or abrasive cleaning agents or cloths be
used. Glass or mirrored panels should be cleaned using a non-solvent based glass cleaner and a
soft cloth. Spills should be removed immediately using a clean cloth. All bathroom furniture will
deteriorate through prolonged periods of exposure to high levels of condensation so bathrooms
must be adequately ventilated using suitable extraction. Failure to ensure adequate ventilation
may invalidate your guarantee. If it required to use the touch-up paint, ensure that the surface is
dry and clean and free from dust or oils. The paint should be applied using a slightly damp
sponge. Carefully dap the paint onto the required area and leave it to dry. Multiple coats may be
required to build-up the paint to give the required finish.
