Installation Guide
Downton Tall Single Base Unit
Important Information
•
Read the instructions carefully.
•
Check the product for any signs of damage and remove any protective film.
•
It is recommended that a technically competent installer undertakes installation.
•
I
t is the installer’s responsibility to carry out a thorough assessment of the wall type
and the weight of the cabinet and use appropriate fixings.
•
Care should be taken when drilling walls to avoid any hidden wires or pipes.
Installation
To secure the unit against the wall, screw the stretcher plates to the
gable panels of the cabinet as shown in the diagram. Ensure that the
screws used are suitable for the thickness of the cabinet.
Mark the position of the holes in the stretcher plates on the wall with a
pencil. Drill the positions marked with a suitable drill bit.
Fasten the unit in position through the stretcher plates using fixings
suitable for the wall type.
Infill panel
There is the option to fit a supplied infill panel. This
should be secured in place using double-sided tape
(not supplied) or fixed in place with screws. Ensure that
the length of screw is suitable for the thickness of the
infill panel and the cabinet legs.
Door hinge adjustment
•
To square the door against the cabinet, turn screws
A until adjusted as required.
•
To adjust the door closer to or further away from the
cabinet, turn screws B.
•
To adjust the door vertically, slacken screws C. Re-tighten
once the door is adjusted as required.
•
To remove the door hinges from the cabinet, press button D.
•
To remove the door hinges from the door, remove screws E.
Care & Maintenance
Furniture should be regularly dusted with a soft cotton or micro-fibre cloth. For more
thorough cleaning, occasionally wipe your furniture with a soft cloth dampened with a
mild detergent solution. Surfaces should be thoroughly dried with a lint free cloth to
prevent watermarks. Under no circumstances should solvent cleaning agents, bleach or
abrasive cleaning agents or cloths be used. Spills should be removed immediately using
a clean cloth. Some furniture polishes are unsuitable for use on painted surfaces. All
bathroom furniture will deteriorate through prolonged periods of exposure to high levels
of condensation so bathrooms must be adequately ventilated using suitable extraction.
Failure to ensure adequate ventilation may invalidate your guarantee.
