Replacing the Battery
Page 23 of 28
Clean both battery contacts and the soldering tags with alcohol.
When performing the following steps, avoid touching the contacts with your fingers.
3.
Prepare a backup of your data, e.g., key and user databases, by using the CryptoServer
administration tool you chose – csadm or CAT. Please read the
CryptoServer PCIe - Quick
Start Guide
and the
CryptoServer - Manual for System Administrators
for further details.
You find detailed information about the Installation of the csadm administration tool and the
csadm commands in the "CryptoServer LAN/CryptoServer CryptoServer Command-line
Administration Tool (csadm) Manual for System Administrators".
You find detailed information about the installation and usage of the CryptoServer
Administration Tool (CAT) in the "CryptoServer - Manual for System Administrators".
4.
Turn off the computer.
5.
Remove the CryptoServer Se from the computer.
6.
On the reverse of the battery clips you will see a hole in the board. Insert a thin tool
(screwdriver) through the hole to remove the battery from its mounting clips (see the
Figure below).
Содержание CryptoServer Gen2 Se Series
Страница 1: ...CryptoServer PCIe Se Series Operating Manual...
Страница 4: ...Table of Contents Page 4 of 28...