Utimaco CryptoServer Gen2 Se Series, Руководство по эксплуатации, Страница: 13 / 28

Unpacking and Handling
Page 13 of 28
4 Unpacking and Handling
The CryptoServer Se is supplied with several encryption keys already stored on it. You cannot
operate the device unless these keys are present. For this reason, take great care when
unpacking and then installing the device.
The CryptoServer Se is also already fitted with a battery when it is supplied. This battery is
already in operation and therefore all the individual contact points and components are
already supplied with power.
The CryptoServer Se is packaged in a special anti-static wrapping. Please retain this
wrapping in case you need to store or transport the device.
The CryptoServer Se must always be stored in this specific anti-static wrapping. This is
because many other types of anti-static wrap are more conducting and may cause a short
circuit on the contact points that supply power.
When unpacking and installing the device, follow all the standard guidelines for working with
electrical devices and take all the applicable protective measures.
In particular, you must note the following points.
Never place the bottom of the circuit board on a surface that can conduct electricity (for
example, the metal cover of a computer), as this can cause a short-circuit.
Take care that the circuit board never touches a metallic object (such as a screwdriver or
wedding ring).
Never touch the contacts on the backside of the circuit board.
4.1 General Notes
The CryptoServer Se is fitted with a system of sensors that can tell whether it is being
operated within a permitted temperature range.
During normal operations, the internal temperature of the CryptoServer Se must not exceed
62 °C (143 °F). If it does, the device will switch off automatically. Consequently, you must
ensure that the CryptoServer Se is cooled to below this temperature.
To ensure that the internal temperature is not exceeded, the environmental temperature
should not be more than 45 °C (113 °F).
For this reason, it is important you note the following installation instructions:
■
The computer in which you want to install the CryptoServer Se must be sited in a cool, well
ventilated place.