Unpacking and Handling
Page 14 of 28
■
Do not place it near sources of heat or in direct sunlight.
■
You must ensure that the expansion slot in which CryptoServer Se is installed lies in the
computer's ventilation airstream.
■
The CryptoServer Se should only be inserted below other plug-in cards that radiate heat.
■
Ensure that you keep one expansion slot free between all other plug-in cards, or other
devices, and the CryptoServer Se.
If you cannot implement this configuration, we strongly recommend you install a PCIe slot
cooling fan directly beside the CryptoServer Se device.
4.2
Installing the CryptoServer Se
Follow the instructions for installing PCIe plug-in cards as specified in the operating manual
for your computer. This is only a general description of the procedure:
1.
Switch off the computer.
2.
Unplug all cables.
3.
Open the computer case.
4.
Select a free PCIe expansion slot and remove the corresponding slot cover on the rear
face of the computer.
5.
Insert the CryptoServer PCIe plug-in card in the computer's PCIe expansion slot. Make
sure the card fits securely.
6.
Close the computer case.
7.
Reconnect the cables.
8.
Switch the computer on again.
Содержание CryptoServer Gen2 Se Series
Страница 1: ...CryptoServer PCIe Se Series Operating Manual...
Страница 4: ...Table of Contents Page 4 of 28...