Utility Relay Company AC-PRO-II, Инструкция по эксплуатации

Страница: 48 / 56

AC-PRO-II
®
Instruction Manual www.utilityrelay.com
Page 46
Figure 22.2: Trip Unit and Display (separated)
InfoPro-AC is a software application that can be used with
AC-PRO-II for the following:
•
Settings – upload, download, view, save, and print.
•
Trip history including waveforms – view, save, and
print.
•
Waveforms (on-demand) – view, save, and print.
•
Current, voltage, & power readings – view.
•
Alarms and trip unit status Information
•
Trip unit info: serial number, firmware versions, breaker
name.
•
Firmware updates
Operating System:
Microsoft Windows, ideally Windows 7, Windows 8
or Windows Vista.
Connection:
mini-USB (cable not included)
NOTE: if AC-PRO-II is located behind a cubicle door,
a USB panel mount extension was provided with the
retrofit kit. (See Section 5.6.1).
The InfoPro-AC™ software application is available for
download at:
http://www.utilityrelay.com/Side_Bar/Downloads.html
Open the downloaded file and follow the instructions to
install the application.
**** IMPORTANT ****
InfoPro-AC needs the correct USB device driver to
communicate with AC-PRO-II. Microsoft Windows often
already includes these drivers. However, if this driver is
not already installed:
1) Ensure your PC is connected to the Internet.
2) Connect AC-PRO-II to your PC with the USB
cable.
3) Automatic driver update process:
a)
After you connect the AC-PRO-II, if you
have an internet connection and
administrative rights on your PC, Microsoft
Windows should install the driver
automatically after a few minutes.
4) Manual driver update process:
a)
Open Windows Device Manager
b) Right click on the AC-PRO-II device. It will
be located under Ports or under Other
Devices.
c) Choose the “Update Driver Software”
option.
d) Choose the “Search automatically” option.
e) After the driver is installed, close and then
reopen the InfoPro-AC Application.
NOTE: Any pending Microsoft Windows updates can
interfere with the driver installation process.
For more detailed instructions with screenshots, contact
URC.
Refer to the InfoPro-AC™ Help Guide within the
InfoPro—AC application for specific information and
instructions.
23.1 Firmware Versions and Updates
To determine which firmware version is currently installed on
your AC-PRO-II, use the MORE menu. See Figure 6.5.
The InfoPro-AC application can be used to update
AC-PRO-II firmware in the field using the USB port.
AC-PRO-II Firmware update instructions can be found in the
InfoPro-AC Help Menu. For firmware version information
see the following link:
http://www.utilityrelay.com/Side_Bar/Firmware_versions.html
23.0 InfoPro-AC
TM
Software Application
Display Main Case
Ribbon Cable