4
ASSEMBLY INSTRUCTIONS
NOTE: This fixture can only be installed on a wall.
1. Turn OFF all power to circuit at main circuit breaker or fuse box.
CAUTION: DO NOT rely on wall switch alone to turn off power.
2. Remove the crossbar from the fixture by unscrewing the
pre-assembled long mounting screw.
3. Attach crossbar to junction box (not included) with the two
crossbar screw (AA).
4. Connect ground wire from the outlet box to the ground wire from
the light (A) by twisting a wire nut (BB) onto bare ends of the
wires. Connect white wire from the outlet box to the white wire
from the light fixture (A) by twisting a wire nut (BB) onto bare
ends of the wires.
Connect the black wire from the outlet box to
the black wire from the light
fixture
(A) by twisting a wire nut (BB)
onto the bare ends of the wires.
Note: The ground wire is green.
Hardware Used
Crossbar Screw
x2
Hardware Used
Wire Nut
x 3
1
3
4
2
