5 of 11
03103436-A10015 Rev. C
July 16, 2021
Pedestal Seat Belt Replacement
The outboard side refers to the side closest to the door. The inboard side is the side
toward the center of the vehicle.
Seat Belt Removal
1. Remove the bolt attaching the D-Loop to the seat belt mount above the seat on the outboard side.
2. Snap open the retractor cover and remove the bolt.
3.
Remove the bolt holding the seat belt end bracket attached to the outboard side of the seat.
4.
On the inboard side of the seat, remove the bolt holding the seat belt buckle assembly.
D-Loop Wear
WEBBING CUT, FRAYED, OR
WORN AT D-LOOP GUIDE
Buckle Wear
BUCKLE (CRACKED
OR BROKEN)
CABLE DAMAGED
OR FRAYED)
When a seat belt is replaced, both halves must be replaced.
Use the new mounting hardware furnished with the replacement belt. Do
NOT use old hardware when installing replacement seat belts.
