Feature
●
Providing 16/24*10/100Mbps downlink Ethernet ports and 2*10/100/1000Mbps uplink
E
thernet
ports.
●
Support IEEE802.3, IEEE802.3u, IEEE802.3ab, IEEE802.3x, IEEE802.3af/at.
●
Support 16/24* PoE ports, max PoE power output is 30W.
●
One-key smart: Default, CCTV, VLAN.
●
6KV surge immunity, ESD protection.
●
Operating temperature: -10
℃
~50
℃
.
●
Plug and play, user-friendly operation. Support installation of desktop, wall mounted, and
rack mounted.
It is recommended to use the standard Cat5e/6 network cable to reach the optimal
transmission distance.
Ca
t5e
/
6
The series switches provide 16/24*
(PoE) and
10/100Mbps downlink Ethernet ports
2*10/100/1000Mbps uplink Ethernet ports, which are widely used in HD video monitoring
system and network project etc. PoE ports 1~16/24 complies IEEE802.3af/at standard, and
PoE output power of each port can be up to 30W. The surge immunity level reaches 6kV and
ESD protection is up to 6kV contact discharge, 8kV air discharge. The switches support 3
operating modes (Default, VLAN, CCTV) and fully meet the application requirement of
security network video monitoring & networking project in hotel, campus, and small &
medium-sized enterprise.
13.238.101.1719
V2.0
LCD
N
VR
PoE Camera
AP
PoE AP
PoE Camera
Application
PoE AP
Please follow installation steps as below:
1) Please turn off the signal source and the device's power, installation with power on
may damage the device.
2) Use network cables to connect IP cameras with the product's downlink Ethernet ports
.
3) Use another network cable or (optical fiber) to connect switch’s uplink port with NVR
or computer.
4) Connect switch with power adapter.
5) Check if the installation is correct and device is good, make sure all the connection is
reliable and power up the system.
6) Make sure every network device power supply works normally.
Notice
Installation Steps
Board
Diagram
Back
Front
LED
Indicator
DIP Switch
10/100Mbps PoE downlink Port
10/100/1000Mbps
uplink Port
LED
Indicator
DIP Switch
10/100Mbps PoE downlink Port
10/100/1000Mbps
uplink Port
1
2
Please check the following items before installation, if it is missing,
please contact the dealer.
●
PoE
Switch
1pc
●
Power
Cable
1pc
●
Mounting
Kits
2pcs
●
User
Manual
1pc
16/24-Port10/100MbpsPoESwitchwith2Gigabit
UplinkPorts
UserManual
10/1
00M
bps P
oE w
ith
2-P
ort G
iga
bit
Up
link S
witc
h
16-Port10/100MbpsPoESwitchwith2Gigabit
UplinkPorts
It is recommended that the equipment should be connected to the protection ground for
better protection performance, otherwise equipment protection will greatly reduced;
Please use 20AWG or thicker wire to connect grounding terminal to the ground.
Notice
24-Port10/100MbpsPoESwitchwith2Gigabit
UplinkPorts
16/24-Port10/100MbpsPoESwitchwith2Gigabit
UplinkPorts
