Regulatory information
Arm doors and windows button
Manufacturer
UTC Fire & Security Americas Corporation, Inc.
1275 Red Fox Rd., Arden Hills, MN 55112-6943,
USA
FCC compliance
This device complies with part 15 of the FCC
Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any
interference received, including interference that
may cause undesired operation.
Changes or modifications not expressly approved
by the party responsible for compliance could
void the user’s authority to operate the
equipment.
FCC ID: B4Z-839-TWTP
2002/96/EC (WEEE directive): Products marked
with this symbol cannot be disposed of as
unsorted municipal waste in the European Union.
For proper recycling, return this product to your
local supplier upon the purchase of equivalent
new equipment, or dispose of it at designated
collection points. For more information see:
www.recyclethis.info.
Used to arm the panel to level 2.
Arm motion sensors button
Used to arm the panel to level 3. If the arm doors and windows
button was previously pressed, the panel is armed to level 4
(doors, windows, and motion sensors armed).
Lights on button
Press twice to turn on all lights controlled by the system. You
can turn on specific lights by pressing the button once and
using the appropriate numeric buttons.
4
Dialog QS1500 Touchtalk Interactive Keypad Installation Instructions
Lights off button
Press twice to turn off all lights controlled by the system. You
can turn off specific lights by pressing the button once and
using the appropriate numeric buttons.
Emergency buttons
The panel will react according to the sensor group they are
learned in to (00 to 07) intrusion, silent, or emergency. Press
and hold both keys or press both keys twice quickly, to activate
alarm reports to the central station.
Contact information
For contact information, see www.utcfireandsecurity.com or
www.interlogix.com.
For technical support, Toll-free: 888.437.3287 in the US
including Alaska, Hawaii, Puerto Rico, and Canada. Outside
the tool-free area: Contact your dealer.
Copyright © 2011 Interlogix, a UTC Fire & Security Company.
All rights reserved.
Battery replacement
When keypad batteries are low, the keypad announces
touchpad low battery
. The panel announces
(sensor name)
low battery
.
Remove the touchpad from the mounting plate and replace all
three batteries with AAA alkaline batteries. Avoid pressing the
buttons on the keypad while you are replacing the batteries.
After replacing the batteries, do a sensor test to realign the
keypad to the panel (see
Specifications
Product number
60-924-3-01
Compatibility
Simon 3 (version 3.3 and later)
Power requirements
Three AAA alkaline batteries
Storage temperature
-40 to 140°F (-34 to 60°C)
Operating temperature
32 to 120°F (0 to 49°C)
Maximum humidity
90% relative humidity, noncondensing
Dimensions (W x D x H) 3.6 x 1.2 x 5.4 in. (91 x 30 x 137 mm)
Installation Wall
mounting
