UTC Fire and Security Interlogix NX-535N, Руководство по установке

Страница: 8 / 19

6 NX-535N Voice Module Installation Manual
Zone 1 LED = 1 Zone 2 LED = 2 Zone 3 LED = 4 Zone 4 LED = 8
Zone 5 LED = 16 Zone 6 LED = 32 Zone 7 LED = 64 Zone 8 LED = 128
Example:
If the numerical data to be programmed in a location is “66”, press [6] - [6] on the
keypad. The LED’s for zone 2 and zone 7 will become illuminated indicating 66 is
in that location (2 + 64 = 66).
Once the data is programmed, press the [*] key to enter the data and advance to
the next segment of that location. After the last segment of a location is
programmed, pressing the [*] key will exit that location, turn the “Ready” LED off
and the “Armed” LED on. As before, you are now ready to enter another
programming location. If an attempt is made to program a number too large for a
particular segment, the keypad sounder will emit a triple beep, indicating an
error, and remain in that segment awaiting a valid entry.
Note: On the LCD keypad, the number in the location will be displayed. For
locations with a maximum of 15, the hexadecimal equivalent will be displayed in
parenthesis. Example: 11 (B) or 14 (E).
Feature selection data: Feature selection data will display the current condition
(on or off) of eight features associated with the programming location and
segment selected. Pressing a button on the keypad (1 through 8) that
corresponds to the “feature number” within a segment will toggle (on/off) that
feature. Pressing any numeric key between [1] and [8] for selection of a feature
will make the corresponding LED illuminate (feature ON). Press the number
again, and the LED will extinguish (feature OFF). You will see that numerous
features can be selected from within one segment. For instance, if all eight
features of a segment are desired, pressing [1] - [2] - [3] - [4] - [5] - [6] - [7] - [8]
will turn on LED’s 1 through 8 as you press the keys, indicating that those
features are enabled.
LCD keypad users note: the numbers of the enabled features will be displayed.
However, the features not enabled will display a hyphen (-).
After the desired setting of features is selected for this segment, press the [*] key.
This will enter the data and automatically advance to the next segment of the
location. When you are in the last segment of a location and press the [*] to enter
the data, you will exit that location. This will now turn the “Ready” LED off and the
“Armed” LED on. As before, you are now ready to enter another programming
location.