NX-535N-V3 Voice Module Installation Manual
10
Examples
Recording leader message
1. Go to program mode of Voice module (Module 77).
2. Select Location 0.
• Segment 1 = 1 (= record mode)
• Segment 2 = 0 (= leader message)
3. Connect a telephone handset into the RJ11 phone jack connector on NX-
535N-V3 module.
4. Press the button on the NX-535N-V3 module and record your message
through the handset. Example: “This is your alarm system calling, press any
key to continue” (*).
5. Press the button again to stop recording. Your message is automatically
played back.
Recording event message #1
1. Go to program mode of Voice module (Module 77).
2. Select Location 0.
• Segment 1 = 1 (= record mode)
• Segment 2 = 1 (= event message 1)
3. Connect a telephone handset into the RJ11 phone jack connector on NX-
535N-V3 module.
4. Press the button on the NX-535N-V3 module and record your message
through the handset. Example: “Intrusion alarm”.
5. Press the button again to stop recording. Your message is automatically
played back.
Recording address message
1. Go to program mode of Voice module (Module 77).
2. Select Location 0.
• Segment 1 = 1 (= record mode)
• Segment 2 = 17 (= address message)
3. Connect a telephone handset into the RJ11 phone jack connector on NX-
535N-V3 module.
