Utax CD 1325, Инструкция по эксплуатации

Страница: 284 / 311

Security
8-2 ADVANCED OPERATION GUIDE
Security Kit Functions
The Security Kit enables overwriting and encryption.
NOTE:
If you install the Security Kit, the
“
Security functions running
”
message appears when the machine starts up and startup may take
longer.
Overwriting
Multi-function printers (MFPs) temporarily store the data of scanned
originals and print jobs, as well as other data stored by users, in the hard
disk, and the data is output from the hard disk for printing. As the data
storage area used for such data remains in the hard disk as is until it is
overwritten by other data, the data stored here remains restorable by
special tools for undesirable use.
The Security Kit erases and overwrites (hereinafter collectively referred to
as
overwrite(s) ) the unwanted data storage area used for the output data
or deleted data so as not to be restored.
No special procedures are required for overwriting, which will be
automatically performed.
CAUTION:
Canceling a job immediately starts overwriting the data that
was stored in the hard disk.
Overwrite Methods
There are two overwrite methods, which can be switched at any time.
Once Overwrite Method
Overwrite a target storage area of the hard disk (for overwriting) or entire
hard disk (for system initialization) with zeroes to disable data restoration.
3-time Overwrite Method (default)
Overwrite the same target storage area of the hard disk as mentioned
above with a random pattern twice and then with zeroes to prevent data
restoration. This method with its higher degree of security makes data
restoration much more difficult than the Once Overwrite method even by a
sophisticated restoration tool.
This method may take more time than Once Overwrite method to process
a larger amount of data.
Instructions for General Users
(for Both General Users and Administrators)