Utax CD 1325, Инструкция по эксплуатации

Страница: 234 / 311

System Menu
6-66 ADVANCED OPERATION GUIDE
Drum Refresh
Refresh the drum when image blur or white spots appear on images in
copies.
There are 2 drum refresh modes.
CAUTION:
Drum Refresh cannot be performed while printing. Execute
Drum Refresh after the printing is done.
To use [Drum Refresh 2], load 11 × 17" or A3 size paper into the MP tray.
When you run [Drum Refresh 2], the machine makes a vibrating sound for
about 90 seconds until drum refreshing is completed. The toner soiling on
the ejected paper is normal and does not indicate a fault.
Use the procedure below to refresh the drum.
1
Place 11 × 17" or A3 on the Multi Purpose tray.
2
Press the System Menu key.
3
Press [ T ], [Adjustment/Maintenance].
4
Press [Execute] of Drum Refresh 1 or Drum Refresh 2 .
5
Press [Yes] to feed
paper to MP Tray
and start Drum
Refresh.
6
Once Drum Refresh ends, return to the Adjustment/Maintenance screen.
Item Description
Drum Refresh 1 Use this mode when images are blurred or
smeared. Refreshing takes about 120
seconds.
Drum Refresh 2 Use this mode when white spots appear on
images. Refreshing takes about 160
seconds.
Adjustment/Maintenance
Status 10/10/2007 10:10
Copy Density Adjustment:
Change
Close
Change
Execute
Execute
Send/Box Density Adjust.:
Change
Print Density:
Correcting Black Line:
Display Brightness:
Charger Auto Cleaning:
Yes
Drum Refresh will be started.
Are you sure?
No
Return to Top