USTER HVI SPECTRUM, Инструкция по эксплуатации

Страница: 110 / 230

USTER
® HVI SPECTRUM
Instruction Manual
Uster Technologies, Inc. Chapter 8
Reports • Page 8-4
2.2 Overview of the Category System
Each sample is placed into a category for each fiber property. The
Category definitions require an estimate of the average value and range
of each property for the samples that will be tested.
Note:
Use the same definitions for both the Reports and Bale Manager
categories if you export the data to Bale Manager.
It is important for yarn spinners to keep in mind that the number
(quantity) of categories for each property should be kept to the minimum
required to adequately cover inventory. This will also allow for small
shifts the average inventory might make over a period of time.
Uster Technologies, Inc. pre-defines the categories at the time of initial
installation using suggested settings. If this pre-set definition does not
correctly represent your inventory, it is important that you make the
necessary adjustments.
Once these categories are accurate, the definitions should not be
changed unless the bales physically remaining in the warehouse are
changed accordingly. A change in the Category Definition screen will
cause the histograms review to be incorrect.
Note:
Give careful consideration to the categories as they are defined.