USR IOT USR-N510, Руководство пользователя

Страница: 15 / 117

User Manual
Your TrustWorthy Industrial IoT Partner www.pusr.com 14
connected to the same network either locally or via gateway connections.
Fig. 13
Hardware connection

Connect the power line with the N5X0 power input. If the power is properly supplied, the “PWR” LED will show a solid red color.
After the system is ready, the “WORK” LED will blink.

Connect one end of the Ethernet cable to the N5X0’s 10/100M Ethernet port and the other end of the cable to the same Ethernet
network( same router or switch ).

Connect a serial data cable(USB to RS232 or RS485) between the N5X0 and PC.
2.7.3. Network configuration（Step1）
The Broadcast Search function is used to locate all N5X0 device servers that are connected to the same LAN as your computer. Since
the Broadcast Search function searches by MAC address and not IP address, all N5X0 connected to the LAN will be located,
regardless of whether or not they are part of the same subnet as the host.
In EthernetTool, click Search to search your LAN for N5X0 device servers. When your unit appears in the search results, you can click
device to select it and change the IP type to DHCH, save your change. Wait for 5s and search it again.
Fig. 14
IP network setting
When accessing the serial server through the Web, the IP address of the serial server and the PC must be in the same network
segment. After changing the IP address of the N5X0, you can access the Web page of the N5X0 series serial server through browser
and perform related configuration operations on it. The user name and initial password are both "admin".After entering the user name
and password, click "OK" and the server will authenticate. After success, you will enter the main page of the Web server, as shown in
Fig.15. The following uses firmware V2 version as an example. For details about the V1 version web page, see
Section 3.1
.