USR IOT USR-N510 страница 117 Скачать руководство пользователя

Страница: 117 / 117

User Manual

Your TrustWorthy Industrial IoT Partner

www.pusr.com

116

10.

AWS IoT service

In order to reduce the length of this document, we have organized this section into a special document. Please refer to “USR-N5X0

Quick Start Guide with AWS IoT” for detail.

11.

PUSR cloud service

In order to reduce the length of this document, we have organized this section into a special document. Please refer to “USR-N5X0

Quick Start Guide with PUSR cloud” for detail.

12.

Warranty

13.

Jinan USR IOT Technology Limited

Address : Floor 12 and 13, CEIBS Alumni Industrial Building, No. 3 Road of Maolingshan, Lixia District, Jinan, Shandong, China

Official website:https://www.pusr.com

Official shop:https://shop.usriot.com

Technical support: http://h.usriot.com/

Email : [email protected]

Tel : +86-531-88826739

Fax : +86-531-88826739-808

14.

Disclaimer

The information in this document provided in connection with Jinan USR IoT technology ltd. and/or its affiliates’ products. No

license, express or implied, by estoppel or otherwise, to any intellectual property right is granted by this document or in connection

with the sale of USR IoT products. EXCEPT AS SET FORTH IN THE TERMS AND CONDITIONS AS SPECIFIED IN THE LICENSE

AGREEMENT FOR THIS PRODUCT, USR IoT AND/OR ITS AFFILIATES ASSUME NO LIABILITY WHATSOEVER AND DISCLAIMS ANY

EXPRESS, IMPLIED OR STATUTORY WARRANTY RELATING TO ITS PRODUCTS INCLUDING, BUT NOT LIMITED TO, THE IMPLIED

WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR NON‐INFRINGEMENT. IN NO EVENT SHALL USR IoT

AND/OR ITS AFFILIATES BE LIABLE FOR ANY DIRECT, INDIRECT, CONSEQUENTIAL, PUNITIVE, SPECIAL OR INCIDENTAL DAMAGES

(INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF PROFITS, BUSINESS INTERRUPTION OR LOSS OF INFORMATION)

ARISING OUT OF THE USE OR INABILITY TO USE THIS DOCUMENT, EVEN IF USR IoT AND/OR ITS AFFILIATES HAVE BEEN ADVISED

OF THE POSSIBILITY OF SUCH DAMAGES. USR IoT and/or its affiliates make no representations or warranties with respect to the

accuracy or completeness of the contents of this document and reserves the right to make changes to specifications and product

descriptions at any time without notice. USR IoT and/or its affiliates do not make any commitment to update the information

contained in this document.

15.

Revision History

Version

Date

Author

Description

1.0.0

2022.7.30

Dean,Gao

Initial

Содержание USR-N510






















































































































Результаты поиска

Содержание USR-N510

Отзывы:

Похожие инструкции для USR-N510

Бренды по названию

Популярные бренды

USR IOT USR-N510, Руководство пользователя

Результаты поиска

Содержание USR-N510

Отзывы:

Похожие инструкции для USR-N510

Бренды по названию

Популярные бренды